crestven
Demo hub ↗

CONNECTED INTELLIGENCE FOR SMT

More uptime.
Less effort.

Your machines already have the data.
Put it to work for your bottom line.

Catch the stop. Find the cause. Send the right person. Turn existing production data into faster action, focused maintenance and less manual supervision.

Connected lines.Clear priorities.Timely action.
PRECISION, CONNECTEDFrom the whole floor
to a single nozzle.
TURN SIGNALS INTO NEXT STEPSSee it. Understand it. Act.

ONE SUITE. SIX PERSPECTIVES.

Understand more.
Improve what matters.

From the shift to the smallest source of loss.
Start with one challenge. Connect the rest as you grow.

What could the opportunity look like in your plant? ↓

PUT A VALUE ON THE OPPORTUNITY

A few minutes.
A bigger opportunity.

What if you recovered 20 minutes per line, per day? Choose an illustrative hourly value or enter your plant’s own estimate. These figures represent potential capacity value, not guaranteed profit.

Example line-hour value

YOUR PLANT. YOUR ASSUMPTIONS.
$187,500/ quarter

Potential value of recovered capacity

Equivalent annual opportunity$750,000 / yearAnnual scenario divided equally across four quarters
500production hours
recovered annually

Aim for payback in 1–2 quarters.
Validate the business case against your investment and measured results during the pilot.

Lines × minutes ÷ 60 × days × value per hour

A scenario, not a forecast or guaranteed saving. Excludes software, integration and intervention costs. Recovered capacity becomes financial value only when your operation can use it.

CRESTVEN / CONNECTED MANUFACTURING01 / CONNECTED PRODUCTIONConceptual hardware / illustrative data

01 / SEE THE WHOLE PICTURE

A busy floor.
A clearer view.

Bring output, program changes and stoppages into one connected perspective. Understand where the shift is slipping, while there is still time to respond.

01
From one line to a connected plantScope the rollout around your equipment and data.
Meet Crestven Pulse ↗
ILLUSTRATIVE SIGNALOutput interruption

Line → Program → Event → Owner

02 / FIND THE SOURCE

Small errors.
Hidden costs.

A missed pickup is more than a counter. Connect component losses with the affected module, head and holder, so your team can investigate the right place.

02
Move beyond plant averagesFollow the signal to the point of loss.
Explore Heads & Insight ↗
ILLUSTRATIVE DIAGNOSTICModule 03 · Head A

Repeated pickup errors
Holder 04 flagged for inspection

Investigate

03 / MAKE MAINTENANCE COUNT

Every nest.
Sharper focus.

Maintenance time is limited. Put recurring no-picks, pickup errors and skipped holders at the front of the queue. Help technicians reach the heads and nozzle nests that need attention first, reduce avoidable maintenance effort and verify the recovery in production.

03
The right maintenance. In the time you have.Prioritize the faults. Preserve required preventive care.
Introducing Crestven Nozzles ↗
ILLUSTRATIVE MAINTENANCE PRIORITYNozzle nest 07

Inspect condition and vacuum path.
Verify before returning to service.

Priority inspection
ONE CONNECTED PERSPECTIVE06 PRODUCTS / ONE CRESTVEN

The detail you need.
The clarity you want.

Start with the problem that matters most.
Build a connected view as your needs grow.

Select a product to explore its preview. JavaScript enables this view.

Illustrative previews. Equipment-level detail depends on the available source data.Open the interactive demo hub ↗

A SMALL START. A MEASURABLE NEXT STEP.

Start focused.
Scale with evidence.

Connect software with practical engineering support.
Understand the floor. Agree the priorities. Measure the improvement.

01

Review your operation.

A remote or on-site engineering review can map production losses, recurring faults and maintenance constraints. Specialist support is scoped around your equipment.

02

Build the pilot plan.

Agree the priorities, success measures, installation approach and itemized pilot price before work begins. Consulting and training can be included in the scope.

03

Improve, then expand.

Use the results to refine maintenance and response workflows. Review measured value and the proposed rollout price before committing to a wider deployment.

U.S.-based software and engineering services.
On-site support and team availability agreed for each project.

BEFORE WE CONNECT

Good questions.
Clear answers.

Do you specialize in Fuji machines?+

Yes. Crestven specializes in Fuji SMT production intelligence, built from hands-on work with functioning Fuji output and attrition dashboards. NXT and AIMEX environments are our focus. We confirm the exact model, software version and available database records before committing to coverage. Crestven is independent software, not a Fuji-endorsed product.

Do we need to collect more machine data?+

Crestven starts with the production information your factory already collects. A local connector runs in your approved factory environment and turns those records into useful trends, alerts and priorities. Your IT team agrees which information is used, where it is stored and who can access it before installation.

Will this slow down production?+

The local integration is designed to minimize impact on production systems. Refresh frequency and resource use are checked with your IT team during the pilot. Crestven does not issue machine-control commands through this monitoring approach.

Can operators and technicians supervise more lines?+

Configurable alerts highlight extended stops, slow feeder changes and recurring errors so the right person can respond where needed. Shared priorities reduce manual watching, reporting and coordination. We measure the opportunity for broader line coverage and reduced supervision during the pilot; staffing decisions remain with your operation.

Does it replace a specialist engineer on every line?+

It brings continuous analysis and a shared priority queue across lines, so a specialist can focus on diagnosis and recovery instead of manual monitoring. Head, holder and nozzle patterns inform maintenance assignments. People still carry out repairs, confirm root causes and verify results; machine data alone is not a complete measure of a person's performance.

How does Crestven improve maintenance priorities?+

High-volume factories rarely have time to inspect everything at once. Heads and Nozzles rank recurring faults and error rates so technicians can focus their available maintenance window on the equipment causing the most disruption. Assign the work, record the intervention and check the result. This supports required preventive maintenance and can reduce avoidable downtime and technician effort.

Can our team access it from phones and other devices?+

The dashboards are designed for phone, tablet and desktop browsers, giving technicians and managers a shared view. Customer access is configured around approved users, roles and network requirements. Remote access, sign-in and permissions are agreed as part of the deployment. The public demo is intentionally open and contains fictional data.

Do you offer engineering consulting?+

Yes. A pilot can include an engineering review of the factory, recommendations, implementation support and training. We agree remote or on-site delivery, specialist availability, responsibilities and pricing before work starts. Software and consulting can be scoped together or separately.

Can we recover the investment in one or two quarters?+

That is the payback target we evaluate together. The calculator models potential recovered capacity using your hourly value. Actual financial benefit depends on usable capacity, demand, intervention costs and the agreed project price. We establish a baseline and success measures before offering any project-specific performance commitment.

Are these demos connected to a real factory?+

No. All six workspaces use fictional programs, people, costs and equipment. Their selectable lines, dates, alerts and actions demonstrate the workflow with a repeating simulation. No customer database or personal production dashboard is connected.

LET’S TALK ABOUT YOUR FLOOR

Your next improvement
starts here.

Discuss the software, an engineering review or a focused pilot.
Based in the United States. Built around your operation.

LET’S MAKE IT SPECIFIC

A better shift.
Starts with a conversation.

Connect with us about a software pilot or engineering review. We’ll discuss your operation, priorities and next steps.

Prefer to talk? Call (650) 360-7700.

PRIVACY & DATA

Your information.
Handled with purpose.

When you submit an enquiry, Crestven receives the contact and company details you provide, your comments and the calculator scenario shown on the page. We use this information to respond, assess your requirements and discuss a potential project. Please avoid including passwords or confidential production records.

Enquiries are stored in our private cloud database and an email notification is sent to our team. Our hosting, database and email providers process the information needed to operate those services. The form uses limited request information to prevent spam. Enquiry records are accessible to authorized people supporting the request.

We retain enquiry information while handling the request and any resulting business relationship, then review it for deletion when no longer needed, subject to applicable recordkeeping requirements. To request access, correction or deletion, contact us by phone or submit an enquiry marked “Privacy request”.

The public demo uses fictional production data and saves demo preferences and actions in your browser. Reset demo clears that demo state. The marketing site includes no advertising trackers. Website service providers may process ordinary technical logs.

Customer deployment arrangements, including data storage, remote access and user permissions, are agreed with each customer. The public demo does not connect to factory equipment.

Effective October 8, 2026